After using the feeder and accessories, all parts must be cleaned. Failure to do so, or inadequate cleaning, will affect the refund of the deposit. Depending on the extent, a cleaning fee will be charged, as the cleaning requires time and materials.

1. Liner : Drain the water with the water pump, remove the liner, pour the remaining water into the drain and discard the liner.
   
   
2. Feeder : Clean both inside and out with a damp cloth and unscented soap. Wipe dry with a dry cloth. Check the folds carefully. Let the feeder dry completely before packing.
   
   
3. Water pump: Open the front and back cover of the pump and remove ALL debris. Wash the pump thoroughly with soap and water.
   
   
4. Draining hose: Rinse the hose with unscented soapy water through the water pump.
   
   
5. Filling hose: Wipe the hose with a cloth with soap / wash it under running water.
   
   
6. Accessories : Clean the faucet adapter, air pump, cover and manual with a cloth with soap.
   
   
7. Strainer : Clean the strainer and then scald it with boiling water.
   
   
8. Additional accessories: All additional accessories are also cleaned.
   
   

IMPORTANT: Make sure the feeder and accessories are dry and empty of water before packing.

The product must be returned as you received it and as you would be happy to use for your birth.

Cleaning is not included in the rental price (it can be purchased as a service), and it is therefore expected that the tenant will do the cleaning themselves, so Enblidstart can only perform a final cleaning and check of the feeding trough and accessories. Also for hygienic reasons, as there is blood and other secretions that must be handled to eliminate any risk of infection.